VCE 2 Pack Cable Brush Wall Plate Cable Pass Through Insert for Wires Single Gang Standard UK White Wallplate with White Brushes

Product Information

The KP2BRBKBK brush faceplate is a simple solution for creating a tidy, organised exit for cable runs.

Wall Plate Cable Passthrough, 2Pack Ancable Wall Plate Decora Wall Plate Cable Passthrough, 2Pack Ancable Wall Plate Decora

The CPT is a unit that can be used to allow a service that can be described as temporary, such as a T. V. camera cable, to pass through a wall/floor yet still maintain the integrity of the wall/floor as designated. The system can be protected against fire and smoke in the same way as the Cable Passthrough System e. The KP4BRBKWH brush faceplate is a simple solution for creating a tidy, organised exit for cable runs.The following information is intended to prompt ideas and ways of solving problems that you may not have been aware of. Snap in brush module commonly used to hide trailing cables from view, comes complete with single gang faceplate. Mount straight onto the wall or onto a standard UK back box (not supplied) • Aperture size: 50x100mm • Mounting screw. Anywhere that people congregate and where the likes of the media such as a TV camera crew, need access within the building, with their recording cables, lighting cables etc. Due to the innovative clamp profile the brush strip can be clamped on any sheet metal edge with a thickness of 1.

Wall Plate, Decora Style, Cable Pass Through G-PLUG Brush Wall Plate, Decora Style, Cable Pass Through

Standard outlet single gang steel wallplates with brush filled aperture to allow cable feed-through for AV equipment. The galvanised tube is welded to a half round metal plate (as under) and the bolts to another half round metal plate claiming the PVC pipe inside.

Snap in brush module commonly used to hide trailing cables from view, comes complete with double gang faceplate. The base plates are suitable for Rittal TS8 enclosures and are installed with standard Rittal clips. The smoke Sock is made using a tough fire retardant fabric with a fire retardant foam strip stitched around each opening. Surrounding the pipe is a fire retardant canvas smoke sock with a draw string at each end to close around any services passing through.

Cable pass-through with brush plates and brush strips | icotek

Smoke socks can be supplied with pull string at each end for short CPTs, or effectively in two halves, one for each end of a long run. Mount straight onto the wall or onto a standard UK back box (not supplied) • Aperture size: 45x50mm • Mounting screws. icotek brush plates and brush strips are a cost-effective solution for a professional cable management.In a fire situation, the smoke sock stops the passage of cold smoke and toxic fumes, and under the effect of heat, the intumescent pipe closer expands, crushing the pipe and sealing the hole through the wall. The accountable factors of the Cable Passthrough System have undergone the relevant testing at FULMER YARSLEY to British Standard BS476, part 22, test No. The minimum and maximum radius of the python is taken into account with access hatches built at strategic intervals, as at every bend for example.

VCE 2 Pack Cable Brush Wall Plate Cable Pass Through Insert

Detail showing a pipe run routing through a suspended ceiling a two hour fire wall onto another two hour fire wall. What is meant by integrity is that in a fire situation, you maintain stability and insulation along with acceptable smoke stopping.

Flame retardant ABS plastic frame (rated UL94V-0) and nylon bristles • 50x45mm aperture accepts approx.