RED Rim Seat Deluxe - Rimming Stool Rimming Chair

Product Information

The distance between the seat and your elbow when bent at an approximate right angle (as if resting on the chair arm). Make sure you are not leaning to one side. If you choose to self-propel with your feet, you will require a chair with a lower seat so that you feet fully reach the floor. You may also benefit from a lap strap or harness to keep you safely in the chair.

ii. The vertical distance between the seat surface and the top of the shoulder, if you need support all the way up your spine. Let me start by saying that tire size is confusing. Until recently, there were no agreed-upon standards on how to measure a tire, so we were left with a mishmash of measurement systems from different countries. Here in the U.S., we follow the imperial system, which uses inches. What is flawed with this system is that it measures the outside diameter of a tire, and the outside diameter changes based on the width of the inflated tire. That’s one of the reasons we’ve reached a nothing-makes-sense world where a 25-inch wheelchair rim fits a 26-inch mountain bike tire. It may help you to maintain an upright posture if you have a belt or harness, which also adds an element of safety. You can have a lap strap or hip belt, as you would wear in an aeroplane, or a higher strap across your tummy. These can be padded for extra comfort. More support can be given by a chest harness which secures you around your torso and over your shoulders. You can also add a crotch strap. You are advised to seek professional advice before you use a full harness, as they can create pressure points and distort a person’s posture if poorly fitted.

Warning!

Wheelchair tables and trays come in a variety of sizes and designs. Some fit across the whole lap space, attaching to both sides of the chair, others are a half-lap size, fitted to one side, which flip over to be used or stored at the side.

If you have good torso strength and stability, you may prefer to have less support and use shorter armrests. This can give more freedom of movement in the upper body and arms. It also means you can move the wheelchair closer in to tables and desks. If you have less upper body stability, you are better off getting good support from the armrests. Measure and record these distances (in centimetres). You may not use all of them, it is dependent on the level of support you require from your chair:

Rim Seat

Self-propelled chairs require the user to use their upper limb, body and grip strength to move the wheelchair, usually by grasping the wheel rims and moving the wheel, and thereby the chair, in the chosen direction. There are alternative ways of propelling a chair which are described below. You should not be ‘squeezed’ into the chair, but have enough space to move within the seat, to rotate your upper body if possible and move your arms. Yet you also need to be supported, especially if you find maintaining your posture tiring and difficult. I am often asked why I use knobby tires on my wheelchair. Since most manual chair users roll on a skinnier tire, my knobbies stand out. It’s a style thing, sure, but they’re not just for style points. “I spend a lot of time off the pavement, and the knobbies are easier to use on that type of terrain,” I usually answer. This is the position in which you hold your body. When using a wheelchair you need to be able to maintain a comfortable, stable, safe and supported seated position. You may need special cushions or support to provide comfort and help you to maintain your position, especially if your sitting tolerance is poor. A wheelchair should add to your freedom and independence; it should enable your comfort and well-being and not limit your body movement or cause pain or pressure ulcers.