Joined in 2023 
82 
63 About this deal
The helicopter supports one Spektrum DSM Satellite port. You can connect a Spektrum satellite receiver to this port. e.g. DSM2 / DSMX nano Satellite receiver with bind button.
FUT/DSM: Change normal mode throttle curve to 0,5,5,5,5. We want governor to be engaged throughout except full negative.If you are using OpenTX we recommend that you upgrade your TX16S to EdgeTX. EdgeTX model configuration files Configuration File The dual ESC 's are improved using high-quality MOSFET' s with lower internal resistance, enhancing the flight characteristics even further. The built-in official receiver supports S-BUS and DSM/ DSMX satellites. The flight controller has three built-in flight modes: stabilizing attitude, soft 3D and aggresive 3D. The OMPHobby M1 RC Helicopter is the original high quality RC helicopter with 290mm blade diameter weighing in at only 118g. The M1 features dual brushless motors along side a powerful onboard flight controller that supports three flight modes - altitude stabilisation, soft 3D and aggressive 3D. The OMPHobby M1 RC Helicopter is a great micro (150 size) 3D Flybarless RC helicopter. Best for indoor flying during bad weather days. It can be flown outside as well. The Archer Plus RS mini receiver is perfect for M1 and M2 helicopters due to its compact size. It even comes with the correct adapter cable. This guide will show you how to setup your Radiomaster TX16S or any EdgeTX / OpenTX Multi-protocol radio for your OMPHobby M1 or M2 Helicopter.
The OMP M1 EVO comes as a BNF “bind and fly” helicopter kit, which requires a separate compatible radio transmitter of your choice. The Radiomaster ZORRO RC Transmitter (4 in 1) comes programmed for use with the M1 RC Helicopter. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S, Zorro etc. SFHSS transmitter. For other brands you can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here). The OMP M1 EVO RC helicopter is the latest OMP Hobby helicopter design, and successor to the popular M1. M1 is a high-quality product developed by OMPHOBBY for helicopter enthusiasts. Its compact size makes it flexible for either indoor flight or outdoor violent flight.This is a “bind and fly” helicopter kit which requires a separate compatible radio transmitter of your choice. The Radiomaster ZORRO RC Transmitter (4 in 1) comes programmed for use with the M1 RC Helicopter. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S, Zorro etc. SFHSS transmitter. For other brands you can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here). The OMPHobby M1 RC Helicopter BnF is a great micro (150 size) 3D Flybarless RC helicopter. Best for indoor flying during bad weather days. It can be flown outside as well. SFHSS/DSM/OMP: Removed PCs curve from pitch mix so pitch doesn't change when switching to stability mode.
Flight Controller: Integrated receiver with Built-in Futaba 2.4GHz Authorized S-FHSS Reveiving Protocol. Also support S.Bus/DSM/DSMX Receivers. OMPHobby M2 EVO and M1 EVO OMP comes with built-in receiver that supports OMP Protocol. In OMP Protocol, the throttle curve is fixed in the helicopter and cannot be adjusted at the Transmitter Radio. OMP protocl supports telemetry for Helicopter battery voltage. Normal, Idle-up1 and Idle-up2 flight modes are assigned by a switch on the Radio transmitter. Note that R-XSR receiver supports 2 modes on SBUS out pin (SBUS mode and CPPM mode). This pin should be in SBUS mode to work with M1/M2 helicopter. The blue LED is turned ON for SBUS mode and OFF for CPPM mode. Press the bind button for 4 seconds to switch between the two modes.
BNF Package Includes:
The dual ESC 's are improved using high-quality MOSFET' s with lower internal resistance, enhancing the flight characteristics even further. The built-in official receiver supports S-BUS and DSM/ DSMX satellites. The flight controller has three built-in flight modes: stabilizing attitude, soft 3d and violet 3d.
For OMP Protocol, there are no pitch curves on the Radio Transmitter as pitch curves are fixed inside the Helicopter. For other protocols, the below curves are used. CurveFor OMP Protocol, there are no throttle curves on the Radio Transmitter as throttle curve is fixed inside the Helicopter. For other protocols, the below curves are used. Curve It is a good idea to remove the main and tail blades of the helicopter to prevent any injury if motors start accidentally. Flight time: the maximum flight time is 8 minutes at ~ 50% throttle and 4 minutes at ~ 90% throttle. You can customize the model configuration as per your linking. Please refer to explanation of different settings. Switch Assignment Receiver Options: OMPHobby or SFHSS built-in (See Below). Both models support external SBUS receivers or Spectrum Satellites
Great Deal 
New Comment