Thompsons One Coat Patio and Block Paving Seal 5L

Product Information

Depending on the finished ‘look’ that you want for your patio, you will need to choose between a gloss or matt sealer. If you want to avoid a gloss finish, the Pro-Kleen PatioSeal dries matt, leaving almost no trace on the paving at all.

To make things easier, the seal has a slightly milky colour when wet, which makes it possible to see which areas have already been covered. One 25 L bottle should be sufficient for the majority of spaces. Can be more suitable for indoor use, or just more pleasant to apply in general, as there’s less smell PatioSeal creates a layer over the stones that makes them easier to clean, and it can help repel dirt, water, and oil. If you like to have BBQs on your patio during summer, but hate the messy grease stains that they leave behind, the surface should get much fewer stains after applying this sealer. Choose the application method for the sealant depending on product’s recommendations – ideally use a roller or sprayer, but have a paintbrush on hand to smooth out any pools of liquidSolvent sealers with polyurethane create a particularly tough seal. It’s a good choice to go for if you want an extremely high gloss finish, as the gloss doesn’t dull easily over time. Do you want to create a matt or gloss finish on your patio? Choose a gloss sealer if you want to create a ‘wet look’, glossy patio. A lot of gardeners like how this looks as it gives the patio a richer, darker appearance.

The water-based acrylic coating can be used on paths, patios, natural stone and concrete, protecting the surfaces from rain, oil, sun and organic growth. It gives quite a glossy finish, especially when two or three coats are applied. However, if your patio is quite porous, you may find that with just one coat it’s still relatively matt. The Bond It Patio Paving Sealer is also relatively effective against the growth of mould and algae. Although it may not stop it from growing altogether, customers have reported noticing a dramatic decrease in the amount of mould present on their patio. Patio Slabs require 6.5m² per litres per coat for the first application and 8.5m² per litre per coat for the second application. Sealers that are mixed with polyurethane resin are best for a long-lasting, high-gloss finish . Acrylic is a common alternative to polyurethane. These may need reapplying more often, but are generally less expensive to buy.The 3.785 L (1 gallon) bottle contains enough sealer to do a couple of coats on the majority of small/medium patios, but a larger amount may be required for bigger areas. Offering good value for money, this Everbuild 405 Path & Patio Seal comes with enough product to coat a large patio at least twice (if not three times). Whereas the majority of sealers leave a mid to high-gloss finish, the Pro-Kleen PatioSeal barely alters the appearance of the stones. This makes it one of the best patio sealers on the market if you want to achieve a matt look on your patio. H226 - Flammable liquid and vapourH336 May cause drowsiness or dizziness.H372 Causes damage to organs through prolonged or repeated exposure.H304 May be fatal if swallowed and enters airways.H411 Toxic to aquatic life with long lasting effects.H335 May cause respiratory irritation.

If your patio is starting to look a little dull and tired, patio sealer can give it a new lease of life, adding a gloss or matt finish to the stones and improving the richness of their colour. The following information will help you make an informed decision when looking for a patio sealer, as well as give you tips on how to use it. Solvent sealers with acrylic are a slightly cheaper option, although they still penetrate well into the paving. They are not quite as long lasting as solvent sealers with polyurethane.After final coat, make sure patio will be protected from rain for several hours. Ideally leave 24 hours of no rain and no traffic on the surface to ensure a full cure. To seal the patio without changing the appearance of the stones, you might want to look for an ‘impregnating sealer’ . These are absorbed into the porous stones instead of sitting on top of them. Solvent-based sealers are the best choice if you want a really tough gloss finish . They keep their shine for an extended period, which is excellent if your priority is longevity. As long as the patio is thoroughly dry and clean of debris before application, it can produce a non-slip, low-sheen finish which protects the slabs from water, stains and wear. The exact area that one bottle can cover is dependent on the porosity of the patio and how the seal is applied.